新款mini-ITX募資上市 簡約耐看 機能十足

NCASE Design日前才在創業募資網站Indiegogo刊登自己最新款全鋁質Mini-ITX機殼M1的設計，原本預計募資67500美元，製造出600台，一圓美夢。但沒想到，僅僅經過了十天，NCASE Design竟募得了超過預期一倍的金額約13500美元，讓這款外型簡約時尚的Mini-ITX全鋁機殼美夢成真。

這款M1迷你小殼嚴格說起來體積不算小，但是其內部容量達12.6L，空間不小，並且可以變換的可能性相當自由，除了可容納30公分長顯卡之外，也可以另外安裝水冷系統，還有多顆系統風扇，機能性相當充足。

另外NCASE M1小殼的外型簡約，相當耐看，而且全鋁質用料也帶來質感加分的效果，髮絲刷紋外殼搭配網孔機板也是恰到好處，消光處理的黑色、銀色兩款雖是基本中的基本，但整體看似不搶眼卻又讓人不忍移開視線！

目前預計生產的600台機殼已經全數售完，相當搶手，希望NCASE Design可以乘勝追擊，此款迷你ITX小殼能夠生產多一點，讓更多玩家可以一親芳澤。

規格：

Dimensions: 240 * 160 * 328mm, 12.6L (250 * 160 *338mm overall)
Motherboard support: Mini-ITX, Mini-DTX
Liquid cooling support: Single 120mm or 240mm slim radiator
PSU: SFX, ATX (limited)
Drives:
3 x 3.5" mounts:

·      1 on case floor

·      2 in removable side bracket (cannot be used with dualradiator)

3 x 2.5" mounts:

·      1 inside chassis front

·      1 behind front panel (in place of optical drive)

·      1 on case bottom (in place of 3.5" drive)

·      included double-stacking bracket allows 2 x 2.5"drives on one mount (depending on drive thickness)

Vertically mounted slim slot-loadoptical drive

Fans:

·      4 120mm fan mounts

·      2 on side bracket

·      2 on case bottom (in place of 3.5" drive)

·      1 x 80/92mm fan mount (bottom)

·      1 x 80/92mm fan mount (rear)

Front ports: 2 x USB 3.0, microphone andheadphone jacks
Power button: red/blue power/drive activity LED
Material: aluminum

Size restrictions and recommendations:

CPU Cooler:

·      Top-down coolers are recommended.

·      Height restriction: 130mm

·      Cooler cannot extend past the top of the board by morethan 10mm. For many larger coolers, this limits motherboard choice to thosewith centrally-located sockets.

·      Large coolers that extend past the front of the boardwill prevent the 3.5" HDD cage from being used.

Watercooling:

·      Sealed liquid coolers or integrated pump/block andradiator/res recommended.

·      Single 120mm or 240mm radiators only.

·      Thinner radiators only (under 40mm).

·      Fans in push/pull are not recommended due to space constraints.

GPU:

·      Rear exhaust cards recommended.

·      Max length: 12.5" (slots 1 & 2), 11" (slot3)

·      Max width:
-For cards up to 11.5" in the first or second slot: 5.5" (4.7"at the PCIe power connectors)
-For cards up to 12.5" or cards in the third slot: 4.4"

Power supply:

·      SFX up to 130mm, modular or non-modular.

·      ATX support via included bracket is limited to 140mmnon-modular PSUs with cards longer than 200mm. ATX PSUs are not recommended dueto limited room for long cables.

200美金的機殼還一大堆人買，這世界是怎麼了。

還真的挺貴的 40鎂是運費
不過作六百個而已 連國際運費還能壓在200之內 也算是OK了吧
你看聯力賣多少就知道ITX行情