找回密碼註冊
12
返回列表 發新帖
作者: shadowsfall
查看: 21070
回復: 10

文章標籤:

文章分享:

+ MORE精選文章:

+ MORE活動推薦:

GEX PRO 850W玩家開箱體驗分享活動

卓越性能,超值選擇 GEX PRO 系列通過 80 PLUS 金牌認證,實現高達 ...

體驗極速WiFi 7!MSI Roamii BE Lite Mesh

第一名 guanrung1110 https://www.xfastest.com/thread-293988-1- ...

極致效能 為遊戲而生 990 PRO SSD 玩家體驗

[*]極致效能固態硬碟 [*]PCIe 4.0 速度大幅提升 [*]優化的電源效率 ...

Micron Crucial PRO D5 6400超頻版 玩家開

解銷更快的遊戲速度! 利用低延遲遊戲記憶體的強大功能 利用 Cruci ...

打印 上一主題 下一主題

[AMD] 我的555BE空冷4G教學測試&極限4.365G認證分享

[複製鏈接]| 回復
11#
 樓主| shadowsfall 發表於 2010-7-9 02:13:26 | 只看該作者
請問CPU VDDA是那裏的電壓?
空冷下不要過多少V?
xZeroG 發表於 2010-7-7 19:07



    簡單的想法是控制CPU LOADINE的電壓

引述一下資料
"Basically what happens to the voltage when a load is applied on the CPU is the voltage actually drops. so if you set your voltage to say 1.45v in BIOS and the CPU VDDA is set to it's lowest setting, under idle conditions, the voltage should be around 1.45v. however, under load, the voltage will actually drop below your setting of 1.45v. how much depends on the make and model of your motherboard.

setting the CPU VDDA to it's highest setting will cause the CPU voltage to be (alot) more than what you set it to in BIOS. for instance, if i set my CPU VDDA voltage to 2.80v (Auto, 2.5, 2.6, 2.7, and 2.8v are the settings on my ATI chipset), under idle conditions, my CPU voltage will be about 0.04-0.05v more than what i set it to in the BIOS. while under load, it can go as high as 0.10v over my BIOS settings.

it does this to make sure that your CPU is always getting a good amount of power so that the power doesn't dip down and cause BSOD's. usually setting it to AUTO is fine as it will use the lowest settings while under idle and use the highest settings while under load. this makes it so that your not wasting too much power and/or over-volting your chip at idle while making sure under load, you're receiving enough power."
您需要登錄後才可以回帖 登錄 | 註冊 |

本版積分規則

小黑屋|手機版|無圖浏覽|網站地圖|XFastest  

GMT+8, 2024-11-22 22:26 , Processed in 0.072792 second(s), 29 queries .

專業網站主機規劃 威利 100HUB.COM

© 2001-2018

快速回復 返回頂部 返回列表